1 door SLIM pantry cabinet

This is a tall cabinet with a single door. This cabinet is designed to work in very tight locations were space is a concern. This cabinet works well as a tray storage cabinet or in place of a wide filler next to appliances.

Category:

NOTES

This is a tall cabinet with a single door. This cabinet is designed to work in very tight locations were space is a concern. This cabinet works well as a tray storage cabinet or in place of a wide filler next to appliances.

Disclaimer:
1. This cabinet does not have a front toe kick (kick plate). You will need to use a toe skin to cover the face of the toe kick if you order this cabinet with a standard recessed toe kick.

2. This cabinet has a single 3/4″ thick plywood back. It does not come with the standard 1/4″ thick back panel like other standard cabinets, so this will change the way you assemble this cabinet. Please see the pictures as the back is attached using confirmat screws from the rear.

3. Please note that for cabinet doors over 60″ tall, a three panel configuration will be used for additional structural support on the cabinet door. For example, if you order the pantry cabinet at 64″ Height, then the door will be just under 60″ tall. That door will have two panels separated by a single mid rail (just like in the sample picture above). If this cabinet is ordered at 70″ tall, then the door will be over 60″ in height. In this case wee will use a door made of three panels with two horizontal rails separating each panel. The extra rail will keep the door structural sound.

QUICK FACTS

  • This cabinet is shipped “ready to assemble”. See “Assembly Instructions” category for more info on how to assemble your cabinets.
  • Construction holes will be visible on the sides of the cabinet once assembled. Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.
  • The interior of this cabinet will be real maple wood veneer over a 3/4″ Purebond Plywood (no VOC), finished with a clear UV (baked-on, UV wood, No VOC). Purebond plywood is top-of-the-line and Made in the USA.
  • Doors, drawer fronts, and face of the cabinet case will be raw wood unless ordered with an optional finish of your choice. See our “wood samples” category for available finishes and corresponding edge banding material specifications.
  • Dovetailed Drawer boxes are assembled, sanded, and sprayed with a clear/natural conversion varnish finish for extreme durability and beauty.
  • The toe kick of the cabinet will show exposed plywood core. Real wood toe skins or base molding (ordered separately) should be used to cover the face of the toe kick once all cabinets are installed. See the “Millwork” category.